Link Aggregation Configuration Commands; Display Link-Aggregation Interface - 3Com 5500-EI PWR Reference Manual

Hide thumbs Also See for 5500-EI PWR:

Table of Contents

Link Aggregation Configuration Commands

link-aggregation

interface-number ]

interface-type: Port type.

interface-number: Port number.

to: Specifies a port index range, with the two interface-type interface-number argument pairs around it

as the two ends.

Use the display link-aggregation interface command to display the link aggregation details about a

specified port or port range.

Note that as ports in a manual link aggregation groups do not acquire the information about their peers

automatically, so the entries in the information about the peer ports displayed are all 0 instead of the

actual values.

# Display the link aggregation details on Ethernet 1/0/1.

<Sysname> display link-aggregation interface Ethernet1/0/1

Ethernet1/0/1:

Selected AggID: 1

Port-Priority: 32768, Oper key: 2, Flag: 0x45

System ID: 0x8000, 0000-0000-0000

Port Number: 0, Port-Priority: 32768 , Oper-key: 0, Flag: 0x38

Received LACP Packets: 0 packet(s), Illegal: 0 packet(s)

Sent LACP Packets: 0 packet(s)

interface-type

interface-number

interface-type

Table of Contents

5500-ei series