Hp Support Tools Manager - HP -UX 11i v2 Support Manual

disk 21 0/2/0/0/0/0.108.11.0.0.1.2 sdisk CLAIMED DEVICE HP MSA VOLUME
disk 22 0/2/0/0/0/0.108.11.0.0.1.3 sdisk CLAIMED DEVICE HP MSA VOLUME
disk 23 0/2/0/0/0/0.108.11.0.0.1.4 sdisk CLAIMED DEVICE HP MSA VOLUME
disk 24 0/2/0/0/0/0.108.11.0.0.1.5 sdisk CLAIMED DEVICE HP MSA VOLUME
disk 25 0/2/0/0/0/0.108.11.0.0.1.6 sdisk CLAIMED DEVICE HP MSA VOLUME
disk 26 0/2/0/0/0/0.108.11.0.0.1.7 sdisk CLAIMED DEVICE HP MSA VOLUME
target 16 0/2/0/0/0/0.108.11.0.0.2 tgt CLAIMED DEVICE
disk 27 0/2/0/0/0/0.108.11.0.0.2.0 sdisk CLAIMED DEVICE HP MSA VOLUME
disk 28 0/2/0/0/0/0.108.11.0.0.2.1 sdisk CLAIMED DEVICE HP MSA VOLUME
disk 29 0/2/0/0/0/0.108.11.0.0.2.2 sdisk CLAIMED DEVICE HP MSA VOLUME
target 17 0/2/0/0/0/0.108.11.0.0.3 tgt CLAIMED DEVICE
disk 30 0/2/0/0/0/0.108.11.0.0.3.6 sdisk CLAIMED DEVICE HP MSA VOLUME
ext_bus 4 0/2/0/0/0/0.108.11.255.0 fclp_vbus CLAIMED INTERFACE FCP Device Interface
target 14 0/2/0/0/0/0.108.11.255.0.0 tgt CLAIMED DEVICE
ctl 2 0/2/0/0/0/0.108.11.255.0.0.0 sctl CLAIMED DEVICE HP MSA CONTROLLER

HP Support Tools Manager

This section describes how to use HP Support Tools Manager (STM) to gather information about
the Fibre Channel adapters, diagnose problems, and update firmware.
STM runs in three modes:
• Menu Mode
Use the mstm command to start STM in Menu Mode.
• X Windows environment
Use the xstm & command to start STM in X Windows.
• Command Line Mode
Use the cstm command to start STM in Command Line Mode.
Three tools are available in STM for Fibre Channel Mass Storage adapters:
• Information Tool
The Information Tool provides information about a Fibre Channel adapter without resetting
the adapter. The following is an example information log:
Log creation time: Tue Jun 6 14:12:23 2000
Hardware path: 8/12
Product ID:
Hardware Path:
Module Type:
Hardware Model:
Hardware Revision Number:
Software Revision Number:
Software Model Number:
Software Option:
Hard Physical Address:
Slot Number:
IODC Revision:
World Wide Name:
Date Code:
• Logtool Utility
The Logtool Utility extracts log errors and enables you to view them. This tool provides
information about a Fibre Channel adapter without resetting the adapter. The following is
an example utility log:
Log creation time: Mon Sep 11 17:47:07 2000
Device Path : 8/12
Product ID:
Product Qualifier: 15
Logger:
Fibre Channel Interface
td
Fibre Channel Interface
8/12
Type-A DMA I/O
0x15
0
0
0xa7
0x80
0xffb4c000
3
0
1000080009F64883
3822
HP Support Tools Manager 23