Table of Contents
Advertisement
10. On the Complete Wireless Settings screen, click Next to complete the wireless setup and close the Wireless
Setting Tool.
Easy Setup Navigator restarts.
11. Follow on-screen instructions to finish configuring the wireless adapter.
Using Advanced Setup to Configure a Wireless Adapter
Select Advanced Setup to configure your wireless adapter with one of the following:
Ethernet
Operator Panel
Dell Printer Configuration Web Tool
WPS-PIN
WPS-PBC
USB
Ethernet
1. Insert the Drivers and Utilities CD provided with the printer in your computer. The Easy Setup Navigator file
launches automatically.
2. Click the Wireless Configuration button on the Easy Setup Navigator window.
The Wireless Configuration window opens.
3. Select Advanced, and then click Next.
4. Select Ethernet, and then click Next.
The instruction video starts.
5. Follow on-screen instructions until the Wireless Setting Tool button appears.
6. Click Wireless Setting Tool to start wireless setup.
The Wireless Setting Tool starts.
7. If your printer is not listed on the Select Printer screen, click Refresh or Enter IP Address.
On the Enter IP Address screen, enter the existing IP address for the printer.
8. In the list on the Select Printer screen, select the wireless printer you want to setup, and then click Next.
9. On the Enter Wireless Network Settings screen, select each wireless setting, and then click Next.
10. On the Select IP Mode screen, select the IP mode you want, and then click Next.
When IPv4 Only is selected:
Hide quick links:
Advertisement
Table of Contents
