Dell 5130 Color Laser User Manual page 243

094-911
Replace Belt
Contact Support
Trans. Error
094-913
Insert Transfer Roller
Ready to Print
142-700
Slow Speed Printing
Ready to Print
193-700
Non-DELL Toner
Installed
Back to Contents Page
The belt unit needs to be replaced now.
The transfer roller is either missing or
not fully installed in the printer.
Since it is abnormally hot or cold inside
the printer, the print speed decreases.
The printer is in the custom toner
cartridge mode.
Order a new belt unit at the website
(www.dell.com/supplies).
See "Replacing the Belt
Follow the instructions in the operator panel and
make sure that the transfer roller has been fully
installed.
See "Replacing the Transfer
You can use the printer, however the print
quality is inferior.
If you wait for a short while, the temperature
within the printer becomes normal.
Though some of the toner cartridges have
reached the end of their lives, you can continue
printing.
Unit."
Roller."