Damage On The Leading Edge Of Paper; The Top Margin Is Incorrect - Dell 5130 Color Laser User Manual

Does this solve your problem?
Check if the wrinkle appeared within the square
6 whose each edge is 30 mm inside the four sides of
the envelope.
Change the envelope with another one and try
again.
7
Does this solve your problem?
If the wrinkle appeared on the envelope flap,
8 confirm the type of the tray in which the envelope
is set first. Is it the MPF?
Press the envelope to expel any remaining air in it.
9
Is the problem reduced or recovered?
Use Tray 1 to feed the envelope.
10
Does this solve your problem?
Change the envelope with another one and then
try again.
11
Is the problem reduced or recovered?

Damage on the leading edge of paper

Action
When you use the MPF, reverse the paper and then try again.
1 When you use any of the Tray 1 to 5, change the paper and then try again.
Does this solve your problem?
Change the paper with another one and then try again.
2
Does this solve your problem?
Use any of the Tray 1 to 5 in place of the MPF.
3
Does this solve your problem?
Jam/Alignment Problems
NOTE: Some of the following procedures that use the Tool Box can also be performed using the operator panel or
Dell Printer Configuration Web Tool. For information on how to use the operator panel and Dell Configuration Web
Tool, see "Understanding the Printer

The top margin is incorrect

recommended one.
The wrinkle had appeared
within the allowable range.
You can use the envelope
you are using.
The task is complete.
Go to action 9.
The task is complete.
The task is complete.
The task is complete.
Menus" and "Dell Printer Configuration Web
Go to action 7.
Contact Dell.
(Tray 1)
Go to action 11.
Go to action 10.
Go to action 11.
The occurrence of wrinkles on
envelope flaps does not indicate
printer failure. There is no
problem to use the printer.
Yes No
(MPF)
Go to action 2.
The task is complete.
(Tray 1 to 5)
Contact Dell.
The task is complete. Go to action 3.
The task is complete. Contact Dell.
Tool."