Dell 5130 Color Laser User Manual page 402

Tray 1 Misfeed jam
Action
Ensure that the tray 1 is properly inserted.
1
Does this solve your problem?
Use thick paper that is 216 gsm or less.
2a
Does this solve your problem?
Use thin paper that is 60 gsm or more.
2b
Does this solve your problem?
Load coated paper on the MPF one sheet at a
time.
2c
Does this solve your problem?
Correct the position of the envelop flap. See
"Loading Print Media."
2d
Does this solve your problem?
Reduce label papers set to 49 mm or less.
2e
Does this solve your problem?
Reduce transparencies set to 12 mm or less.
2f
Does this solve your problem?
Ensure that the print media is not curled.
2g
Does this solve your problem?
Is the print media damp?
2h If so, turn the media over and then try again.
Does this solve your problem?
Fan the print media.
3a
Does this solve your problem?
Wipe the separator rollers in tray 1 with a
cloth moistened with water.
3b
Does this solve your problem?
Press the envelope to expel any remaining air
in it.
3c
Does this solve your problem?
Smooth the envelope if there is any distortion
on it.
3d
Does this solve your problem?
Use print media that is not damp.
4a
Does this solve your problem?
Reduce the number of envelopes set.
4b
Yes No
Proceed to the action corresponding to the type of
the print media being used:
Thick - 2a
Thin - 2b
The task is Coated - 2c
complete. Envelope - 2d
Label paper - 2e
Transparency - 2f
Manual Dup - 2g
Others - 2h
The task is
Go to action 3a.
complete.
The task is
Go to action 3a.
complete.
The task is
Go to action 3b.
complete.
The task is
Go to action 3c.
complete.
The task is
Go to action 2g.
complete.
The task is
Go to action 3a.
complete.
The task is
Go to action 3a.
complete.
The task is
Go to action 4a.
complete.
The task is
Go to action 3b.
complete.
The task is
Contact Dell.
complete.
The task is
Go to action 3d.
complete.
The task is
Go to action 4b.
complete.
The task is
Go to action 3a.
complete.
The task is
Go to action 4c.