Determining Values; Entering Values - Dell 5130 Color Laser User Manual

6. Adjust all straight lines to a value of 0. Preview image of before and after adjustment will help.
CAUTION: After printing the color registration chart, do not turn off the printer until the printer motor
has stopped running.
NOTE: If the straightest line does not line up perfectly with 0, then determine a value and adjust the color again.

Determining Values

From the lines to the right of the Y (Yellow), M (Magenta), and C (Cyan) pattern, find the values of the straightest lines.
NOTE: You can also use the densest colors of the lattice pattern to find the straightest lines. The colors printed at
the highest density are those next to the straightest lines. When 0 is the value nearest the straightest line, you do
not need to adjust the color registration. When the value is not 0, follow the procedure outlined in
Values".

Entering Values

When Using the Operator Panel
Using the operator panel, enter the values that you found in the color registration chart to make adjustments.
1. Press Menu button.
2. Press button until Admin Menu is highlighted, and then press
3. Press button until Maintenance is highlighted, and then press
4. Press button until Color Reg Adj is highlighted, and then press
5. Press button until Enter Number is highlighted, and then press
The first digit of the Enter Number (for LY, LM, and LC) is highlighted.
6. Press or button until you reach the value (for example, +3) displayed on the chart.
7. Press button once until the next value is highlighted.
When all values are entered, press
The first digit of the Enter Number (for RY, RM, and RC) is highlighted.
8. Repeat Step 6 and then press
When all values are entered, press
9. Press button until Color Regi Chart is highlighted, and then press
The color registration chart is printed with the new values.
(Set) button.
button once until the next value is highlighted.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set) button.
"Entering