Dell 5130 Color Laser User Manual page 124

Address
IP Filter
9
Address Mask
(IPv4)*
Active Mode
1
* This item is available only when connecting the printer with a wired network.
2
* This item is available only when connecting the printer with a wireless network.
3
* This item is displayed when IPv4 Mode is selected.
4
* This item is displayed when IPv6 Mode is selected.
5
* This item is displayed only when Use Manual Address is Enable.
6
* This item is displayed only when an IP address has been assigned.
7
* This item is available only when using IPv6 dual mode.
8
* This item is displayed only when the optional hard disk is installed and is set to On for encryption.
9
* This item is only available for LPD or Port9100.
NetWare Setup Page
Purpose:
To verify the current settings of NetWare. In this page, you can only verify the settings of items. If you want to change
the settings, go to the pages in the Print Server Settings tab.
Values:
Port Status
Device Name
Active Mode
Tree Name
NetWare
Context Name
Polling Interval
Status
Information
SLP Active Discovery
E-Mail Alert Setup Page
Purpose:
To verify the current settings of SMTP/POP (Simple Mail Transfer Protocol/Post Office Protocol) used for the e-mail feature
and E-Mail Alerts feature. In this page, you can only verify the settings of items. If you want to change the settings, go to
the pages in the Print Server Settings tab.
Values:
Port Status
Primary SMTP
Gateway
SMTP Port Number
E-Mail Send
printer.
Displays the list of subnet mask that are permitted or denied access to the
printer.
Displays whether to be permitted or denied access to the printer.
Displays the port status. When NetWare is implemented, the status of TCP/IP is also
displayed.
Displays the printer name.
Displays the current mode for Active Mode.
Displays the tree name.
Displays the context name of the Print Server Object.
Displays the time interval from when print data enters the print queue until printing
starts.
Displays messages according to the conditions of the printer.
Displays whether active discovery is enabled.
Displays the port status.
Displays the primary SMTP (Simple Mail Transfer Protocol) gateway.
Displays the SMTP port number.