Dell 5130 Color Laser User Manual page 115

Duplex Mode
Low Toner Alert
Specifies whether to show the message when the toner is short.
Msg
2
Specifies whether to offset the position of the output paper.
Job Offset*
Banner Sheet
Specifies whether to put the banner sheet per offset print.
2
Offset*
Job Offset of
Specifies whether to staple the offset print.
2
Staple*
Stapler Cart.
Specifies whether to continue the print job when the stapler cartridge is empty.
2
Empty*
1
* This item is available only when the optional memory module is installed, and also when the optional hard disk is not
installed.
2
* This item is available only when the optional output expander is installed.
Parallel Settings
Purpose:
To configure the parallel interface.
Values:
Parallel Port Specifies whether to enable the parallel interface.
ECP Specifies whether to enable the ECP communication mode of the parallel interface.
Adobe Protocol Specifies PostScript communication protocol for each interface.
Network Settings
Purpose:
To Specify the PostScript communication protocol for this printer.
Values:
Adobe Protocol Specifies PostScript communication protocol for each interface.
USB Settings
Purpose:
To change printer settings affecting a USB port.
Values:
USB Port Specifies whether to enable the USB interface.
Adobe Protocol Specifies PostScript communication protocol for each interface.
PCL Settings
Purpose:
To change the printer settings that only affect jobs using the PCL emulation printer language.
Values: