Click Connect; Enter The Security Key And Click Ok, If Necessary - Dell 5130 Color Laser User Manual

c. Select Network and Sharing Center.
d. Select Connect to a network.
e. Select the setting you send to the printer from the network items listed in Connect to a network.
f. Select Connect Anyway in the warning dialog box indicating you are entering an unsecured area.
g. Click Close in the dialog box after confirming the connection is a success.
For Windows Server 2008:
a. Open Control Panel.
b. Select Network and Sharing Center.
c. Select Connect to a network.
d. Select the setting you send to the printer from the network items listed in Connect to a network.
e. Select Connect Anyway in the warning dialog box indicating you are entering an unsecured area.
f. Click Close in the dialog box after confirming the connection is a success.
For Windows Server 2008 R2 and Windows 7:
a. Open Control Panel.
b. Select Network and Internet.
c. Select Network and Sharing Center.
d. Select Connect to a network.
e. Select the setting you send to the printer from the network items listed in the available network list, and

click Connect.

f. Enter the Security key and click OK, if necessary.
For Fixed IP networks:
1. Setting up your computer for wireless connectivity:
NOTE: If your computer provides a wireless adapter tool, change the wireless settings using this tool. Or you can
change the wireless settings using the tool provided with the operating system. See the instructions below.
For Windows XP and Windows Server 2003:
a. Select Network Connections from Control Panel.
b. Right-click Wireless Network Connection and select Properties.
c. Select the Wireless Networks tab.
d. Ensure the check box for Use Windows to configure my wireless network settings is checked.
NOTE: Be sure to write down the current wireless computer settings in
restore them later.
e. Click the Advanced button.
f. Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box.
g. Click the Add button to display Wireless network properties.
h. Under the Association tab, enter the following information and click OK.
Step d and Step f so that you can