Configure Your Machine For A Wireless Network Using The Machine's Control Panel Setup Wizard - Dell E310dw User Manual

NOTE: Your Dell machine supports the use of the first WEP key only .
2. Press p or q to select the Network option, and then press OK.
3. Press p or q to select the WLAN option, and then press OK.
4. Press p or q to select the Setup Wizard option, and then press OK.
5. When WLAN Enable? appears, press p to select On.
This will start the wireless setup wizard. To cancel, press Back.
6. The machine will search for your network and display a list of available SSIDs. When a list of SSIDs appears,
press p or q to select the SSID you want.
7. Press OK.
8. Enter the WEP key, and then press OK.
To apply the settings, press p. To cancel, press q .
NOTE: Your Dell machine supports the use of the first WEP key only .
9. The machine will attempt to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays Connected. The machine will print
your machine's wireless status report. If the connection fails, check the error code on the printed report.
NOTE: If the connection fails, your machine reverts to a wired network interface .
For Windows :
®
You have completed the wireless network setup. Install drivers and software necessary for operating your device from
the Installer CD-ROM.
For Macintosh:
You have completed the wireless network setup. To install drivers and software necessary for operating your device,
double-click "StartHereOS X.app" in the installation CD-ROM.
Configure Your Machine for a Wireless Network Using the Machine's Control Panel
Setup Wizard
Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings of the computer to which you are connecting.
Network Name (SSID)
Network Key
For example:
Network Name (SSID)
HELLO
Network 93