Dell 5130 Color Laser User Manual page 126

Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
Ethernet
Settings
1
Ethernet*
Current Ethernet Settings
MAC
Address
LPD
Port9100 Select the check box to enable Port9100.
IPP
WSD
FTP
NetWare
Port
Status
Bonjour
(mDNS)
E-Mail
Alert
Telnet
SNMP
1
This item is available only when connecting the printer with a wired network.
*
NOTE: The settings in the Port Settings page will be valid only when the printer is rebooted. When you change or
configure the settings, click the Apply New settings button to apply new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values:
IP Mode
Host Name
IPv4
Auto
10Base-T
Half-Duplex
10Base-T
Full-Duplex
100Base-TX Half-
Duplex
100Base-TX Full-
Duplex
1000Base-T Full-
Duplex
Displays the printer's MAC address.
Select the check box to enable LPD.
Select the check box to enable the IPP port.
Select the check box to enable the WSD port.
Select the check box to enable FTP.
Select the check box to enable the NetWare port. You can also configure the transport protocol
to be used. TCP/IP can be selected simultaneously as the transport protocol.
Select the check box to enable the Bonjour(mDNS) feature.
Select the check box to enable the E-Mail Alert feature.
Select the check box to enable Telnet.
Select the check box to enable the SNMP (Simple Network Management Protocol).
You can also configure the transport protocol to be used. UDP and IPX can be selected
simultaneously as the transport protocol.
Specifies the IP mode.
Specifies the host name.
IP Address Mode
Manual IP
Address
Manual Subnet
Detects Ethernet transmission rate and the duplex settings
automatically.
Selects 10Base-T Half-Duplex as the default value.
Selects 10Base-T Full-Duplex as the default value.
Selects 100Base-TX Half-Duplex as the default value.
Selects 100Base-TX Full-Duplex as the default value.
Selects 1000Base-T Full-Duplex as the default value.
Displays the current settings of Ethernet.
Selects the IP address mode.
Sets the IP address.
Sets the subnet mask.