Streaks Appear On The Output; Part Or The Entire Output Is Black - Epson AcuLaser CX29NF User Manual

Streaks Appear on the Output

Problem
Streaks appear on the output.

Part or the Entire Output Is Black

Action
The toner cartridges may be low or need to be replaced. Confirm the amount of
toner in each toner cartridge.
1. Check the toner level in the Printer Status window.
2. Replace the toner cartridges as necessary.
If the problem persists, replace the drum cartridge if you have a spare cartridge.
Replace the drum cartridge if you have a spare cartridge.
See Also:
❏
"Replacing the Drum Cartridge" on page 403
❏
"Installing the Drum Cartridge" on page 407
If the problem persists, contact the Epson local representative office or an
authorised dealer.
Epson AcuLaser CX29 Series
Troubleshooting
User's Guide
341