Identifying The Location Of Paper Jams - Epson AcuLaser CX29NF User Manual

❏ Push the tray in firmly after loading.
❏ Ensure that all cables that connect to the printer are correctly attached.
❏ Overtightening the guides may cause jams.
❏ Wipe the feed roll in the tray or SSF with a cloth that is slightly dampened with water if jams caused
by misfeeding paper occur frequently.
See Also:
❏ "About Print Media" on page 86
❏ "Supported Print Media" on page 88

Identifying the Location of Paper Jams

Caution:
c
Do not attempt to remove a paper jammed deeply inside the product, particularly a paper wrapped
around a Fuser Unit or a heat roller. Otherwise, it may cause injuries or burns. Switch off the
product promptly and contact your local Epson representative.
Important:
Do not attempt to clear any jams using tools or instruments. This may permanently damage the printer.
Epson AcuLaser CX29 Series
Troubleshooting
User's Guide
305