Non-Genuine Mode - Epson AcuLaser CX29NF User Manual

Non-Genuine Mode

When toner within a toner cartridge is end of its service life, the Replace XXXX Print Cartridge
(XXXX: Yellow, Magenta, Cyan, or Black) message appears.
When you want to use the printer in Non-Genuine mode, program the mode and replace the toner
cartridge.
Important:
If you use the printer in the Non-Genuine mode, the performance of the printer may not be at its
optimum. And any problems that may arise from the use of the Non-Genuine mode are not covered by
our quality guarantee. The continuous use of the Non-Genuine mode can also cause the printer to break
down, and any repair charges for such break down will be incurred by users.
Note:
Before starting the operation described below, confirm that Ready is displayed on the LCD panel.
1. Press the System button.
2. Select Admin Menu, and then press the
3. Select Maintenance, and then press the
4. Select Non-Genuine, and then press the
5. Select Toner, and then press the
6. Select On, and then press the
7. Press the button twice.
The printer switches to the Non-Genuine mode.
button.
button.
button.
button.
button.
Epson AcuLaser CX29 Series
Troubleshooting
User's Guide
384