Epson AcuLaser CX29NF User Manual page 239

Values:
Auto*
10BASE-T Half
10BASE- T Full
100BASE- TX Half
100BASE- TX Full
1000BASE- T Full
TCP/IP
Purpose:
To configure TCP/IP settings.
Values:
IP Dual Stack*
Mode
IPv4
IPv6
Detects the Ethernet settings automatically.
Uses 10BASE-T Half-duplex.
Uses 10BASE-T Full-duplex.
Uses 100BASE-TX Half-duplex.
Uses 100BASE-TX Full-duplex.
Uses 1000BASE-T Full-duplex.
Uses both IPv4 and IPv6 to set the IP address.
Uses IPv4 to set the IP address.
Uses IPv6 to set the IP address.
Using the Operator Panel Menus and Keypad
Epson AcuLaser CX29 Series User's Guide
239