Connecting Printer To Computer Or Network - Epson AcuLaser CX29NF User Manual

Connecting Printer to Computer or Network

Connect the printer via Ethernet or USB. A USB connection is a direct connection and is not used for
networking. An Ethernet connection is used for networking. Hardware and cabling requirements
vary for the different connection methods. Ethernet cable and hardware are generally not included
with your printer and must be purchased separately.
The available features for each connection type are shown in the following table.
Connection Type
USB
Ethernet
USB Connection
A local printer is directly connected to your computer using the USB cable. If your printer is connected
to a network instead of your computer, skip this section and go to "Network Connection" on
page 59.
To connect the printer to a computer:
Available Features
When connected via USB you can:
❏
Instruct print jobs from a computer.
❏
Scan and print an image into an application.
❏
Scan and print an image to a folder on the computer.
❏
Use the Address Book Editor to manage address book entries.
When connected via Ethernet you can:
❏
Instruct print jobs from a computer on the network.
❏
Scan to a computer on the network.
❏
Scan to email.
❏
Use EpsonNet Config to manage address book entries.
Epson AcuLaser CX29 Series
Network Basics
User's Guide
58