Epson AcuLaser CX29NF User Manual page 246

Number of Redial
Purpose:
To specify the number of redial attempts to make when the destination fax number is busy, within the
range of 0 to 9. If you enter 0, the printer will not redial. The default is 3.
Redial Interval
Purpose:
To specify the interval between redial attempts within the range of 1 to 15 minutes. The default is 1
minute.
Junk Fax Filter
Purpose:
To reject unwanted faxes by accepting faxes only from the fax numbers registered in the Phone Book.
Values:
Off*
On
Remote Receive
Purpose:
To receive a fax by pressing a remote receive code on the external telephone after picking up the
handset of the telephone.
Values:
Off*
On
Remote Rcv Tone
Purpose:
To specify the tone in two digits to start Remote Receive.
Does not reject faxes sent from unwanted numbers.
Rejects faxes sent from unwanted numbers.
Does not receive a fax by pressing a remote receive code on the external
telephone.
Receives a fax by pressing a remote receive code on the external telephone.
Using the Operator Panel Menus and Keypad
Epson AcuLaser CX29 Series User's Guide
246