7. Reconnect the power cord to the power connector and turn on the printer.
8. If you installed the optional duplex unit after installing the print driver, update your driver by
following the instructions for each operating system. If the printer is on a network, update the
driver for each client.
Updating Your Driver to Detect Optional Duplex Unit
The following procedure uses Microsoft
Microsoft Windows 7/
Windows 7 x64/
Windows Server 2008 R2 x64
®
®
Windows
1. Click Start — Devices and Printers.
2. Right-click the printer icon of the Epson AcuLaser CX29 Series and select Printer
properties.
3. Click the Options tab, and then click Get Information from Printer.
4. Click Apply, and then click OK.
5. Close the Devices and Printers folder.
Epson AcuLaser CX29 Series
and the PCL 6 driver as an example.
User's Guide
Basic Operation
42