Streaks Appear On The Output; Part Or The Entire Output Is Black - Epson AcuLaser C2900N User Manual

Streaks Appear on the Output

Problem
Streaks appear on the output.

Part or the Entire Output Is Black

Action
The toner cartridges may be low or need to be replaced. Confirm the amount of
toner in each toner cartridge.
1. Check the toner level in the Printer Status window.
2. Replace the toner cartridges as necessary.
If the problem persists, replace the drum cartridge if you have a spare cartridge.
Replace the drum cartridge if you have a spare cartridge.
See Also:
❏
"Replacing the Drum Cartridge" on page 210
❏
"Installing the Drum Cartridge" on page 212
If the problem persists, contact the Epson local representative office or an
authorised dealer.
Epson AcuLaser C2900 Series
Troubleshooting
User's Guide
170