Threshold Alert(S); Open Trunking; Export Configuration Report; Enable Web Server - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Threshold Alert(s)

Open Trunking

Export Configuration Report

Enable Web Server

Edge Switch 2/24 Product Manager User Guide
Select this option to configure threshold alerts for ports. A threshold alert
notifies users when the transmit (Tx) or receive (Rx) throughput reaches
specified values for specific switch ports or port types (E_Ports, F_Ports or
FL_Ports). Using this option, you can configure:
A name for the alert.
A threshold type for the alert (Rx, Tx, or either).
Active or inactive state of the alert.
Threshold criteria. This criteria includes configuring the threshold as the
percent of port traffic capacity utilized (% utilization). You must also
configure the time interval during which the throughput is measured and
the maximum cumulative time that the throughput percentage threshold
can be exceeded during this time interval before an alert is generated.
Select this option to enable the optional Open Trunking feature. This feature
monitors the average data rates of all traffic flows on ISLs (from a receive port
to a target domain), and periodically adjusts routing tables to reroute data
flows from congested links to lightly loaded links and optimize bandwidth
use. The feature can be installed through the Configure Feature Key dialog
box. For details, refer to
Select this option to display the Export Configuration Report dialog box,
which enables you to specify a file name in which to save an ASCII text file
containing all current user-definable configuration options in a printable
format. Note that this file cannot be read back into the Product Manager in
order to set configuration parameters.
To select this option, place a check mark in the check box to enable the
Embedded Web Server interface on the switch. Select the option again to
remove the check mark and disable the Embedded Web Server interface.
When disabled, users at remote workstations cannot access the interface. If
enabled, HP recommends changing the user names and/or passwords from
their default values to prevent unauthorized access.
"Open Trunking" on page 177.
Product Manager Overview
37