Enable Telnet; Logs Menu; Audit Log; Event Log - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Product Manager Overview

Enable Telnet

Logs Menu

Click on the Logs menu from the menu bar to display the following options. For
detailed information on using these dialog boxes, refer to "Overview" on
page 140.

Audit Log

Event Log

Hardware Log

38
To select this option, place a check mark in the check box to enable telnet
access to the switch. Select the option again to remove the check mark and
disable telnet access. When disabled, users at remote workstations cannot
access the switch through telnet to use the Command Line Interface (CLI) or
perform other tasks. If enabled, HP recommends changing the user names
and/or passwords from their default values to prevent unauthorized access.
This log provides a record of all configuration changes made on the switch.
Each entry displays the date and time of the change, a description of the
change, the source of the change (such as the HAFM server or SNMP
management station), and an identifier for the source, such as the IP address
of the HAFM server or SNMP management station.
Select this option to display the switch Event Log. This log provides a record
of significant events that have occurred on the switch, such as hardware
failures, degraded operation, and port problems. Each entry includes the date
and time of the event, a reason code for the event, the severity level, a brief
description, and up to 32 bytes of supplementary event data. Refer to the HP
StorageWorks Edge Switch 2/24 Service Manual for more information.
This log displays information on FRUs inserted and removed from the switch.
Each log entry includes the name of the FRU inserted or removed, the slot
position relative to identical FRUs installed, whether the FRU was inserted or
removed, the FRU part number and serial number, and the date and time the
FRU was inserted or removed.
Edge Switch 2/24 Product Manager User Guide