Identification; Operating Parameters; Switch Binding - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Identification

Note:
View and in the HAFM Product View, if the Product View is configured to display
names.

Operating Parameters

Switch Binding

Edge Switch 2/24 Product Manager User Guide
Select this option to display the Configure Identification dialog box. Enter
the following information in this dialog box:
— Name - Assign a product name. Note that you can set this name as the
nickname for the switch's WWN, using the Set Name as Nickname
check box. The nickname then displays instead of the WWN in Product
Manager views.
— Description - Assign a unique product description.
— Location - Describe the product's location.
— Contact - Assign a contact either by name, phone number, or e-mail
address.
This information displays in the identification table at the top of the Hardware
This option offers the ability to configure switch and fabric parameters.
Use the Switch Parameters dialog box to set parameters on the switch for
fabric operation. Set other fabric operating parameters, such as preferred
domain ID (1 to 31), Domain RSCNs, and Zoning RSCNs. In addition, you
can also enable the rerouting delay feature. Refer to
Parameters" on page 104 for more information on configuring the switch
priority and rerouting delay.
Use the Fabric Parameters dialog box to set parameters for fabric operation.
In this dialog box, you can set the resource allocation time-out value
(R_A_TOV) and error detect time-out value (E_D_TOV) in tenth-of-a-second
increments, as well as other fabric operating parameters, such as switch
priority level (Principal, Default, or Never Principal) and interop mode. You
must take the switch offline through the Set Online State dialog box to
configure these parameters.
This submenu provides two options: Change State and Edit Membership
List. Choosing Change State displays the Switch Binding State Change
dialog box where you can activate switch Binding according to a specific
Product Manager Overview
"Configure Switch
35