Configure Date And Time Manually - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

2. Perform one of the following options:
Note:
Figure 32: Configure date and time manually
Note:
the range of 0 to 59.
3. If you are finished configuring the switch, backup the configuration data. For
Edge Switch 2/24 Product Manager User Guide
Option 1: To immediately synchronize the switch date and time with the
HAFM server, click Sync Now. Make sure that a check mark is in the
Periodic Date/Time Synchronization check box.
If you click Activate, the date and time synchronize at the next update period.
Option 2: To synchronize the switch date and time with a specific date and
time that you enter:
a. Make sure that Periodic Date/Time Synchronization is disabled (no
check). Refer to
b. Click in a Date or Time field that you want to change.
c. Delete characters and enter new ones as required or highlight the existing
character by dragging the mouse cursor over the character and typing the
new character.
When entering the hours, use the range of 0 to 23, for minutes and seconds, use
d. Click Activate to set the date and time on the switch.
more information, refer to
on page 137.
Figure 32.
"Backing Up and Restoring Configuration
Configuring the Switch
Data"
123