Configure Snmp - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configure SNMP

Use the procedure in this section to:
Note:
through SNMP management stations that are not configured with community names.
Edge Switch 2/24 Product Manager User Guide
Configure the SNMP agent that runs on the switch and implements the
following MIBs:
— MIB-II
— Fabric Element MIB
— Fibre Alliance (FCMGMT) MIB
— Switch private MIB
For complete information on objects defined in MIBs and steps to download
MIB variables to your SNMP workstation, refer to the HP StorageWorks
SNMP Reference Guide for Directors and Edge Switches.
Configure network addresses and community names for up to six SNMP trap
recipients.
An SNMP trap recipient is a network management station that receives
messages through SNMP for specific events that occur on the switch.
Define SNMP community names that SNMP managers use for reading
variables.
Authorize write permissions for writable MIB variables.
SNMP managers may request, but will not receive, traps and SNMP data
Configuring the Switch
115