HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 30

Product Manager Overview
28
Configure LIN alerts.
Configure Nickname to display instead of World Wide Name (WWN) for the
switch and attached devices.
Configure port binding and port speed.
Configure SNMP trap recipients and community names.
Configure Switch Binding if optional SANtegrity Binding feature is installed.
Configure Open Trunking if optional Open Trunking feature is installed.
Configure Open Systems Management Server Features (if installed).
Configure the switch name, location, description, and contact person.
Control individual Fibre Channel ports by blocking/unblocking operation,
enabling link incident (LIN) alerts and WWN binding, setting data speeds,
and running internal and external loopback diagnostics.
Display FRU properties such as the FRU name, physical position in the switch
(chassis slot number), active failed state, part number, and serial number.
Display information for individual Fibre Channel ports, such as the port name,
port number, Fibre Channel address, operational state, type of port, and login
data.
Display information on nodes attached to ports.
Display port performance and statistics.
Display vital product data for the switch, such as the system name,
description, contact person, location, status, model number, firmware and EC
level, and manufacturer.
Enable beaconing for ports and the switch unit.
Monitor the operational status of the switch and each of its hardware
field-replaceable units.
Perform an initial program load (IPL).
Perform maintenance tasks for the switch including maintaining firmware
levels, administering the call-home feature, accessing the switch logs, and
collecting data to support failure analysis.
Reset port operation.
Run port diagnostics.
Set the date and time on the switch.
Edge Switch 2/24 Product Manager User Guide