Configuring the Switch
Figure 34: New Threshold Alerts dialog box - first screen
3. Enter a name from one to 64 characters in length. All characters in the ISO
4. Select one of the following from the drop-down list under the Name field:
5. Click Next.
Note:
126
Latin-1 character set, excluding control characters, are allowed.
— Rx Throughput. An alert will occur if the threshold set for receive
throughput is reached.
— Tx Throughput. An alert will occur if the threshold set for transmit
throughput is reached.
— Rx or Tx Throughput. An alert will occur if the threshold set for either
receive or transmit throughput is reached.
A new screen appears with additional parameters. The name configured for
the alert appears at the top of the screen.
Click Previous if you need to return to the previous screen.
Edge Switch 2/24 Product Manager User Guide