Installing and Configuring the Edge Switch 2/32
Create New Alerts
1. At the Hardware View page, choose Configure > Threshold Alerts. The
Note:
alert, type of alert (Rx, Tx, or Rx or Tx), and alert state (inactive or active).
Figure 24: Configure Threshold Alerts dialog box
2. Click New. The New Threshold Alert dialog box displays, as shown in
Figure 25: New Threshold Alerts dialog box
72
Configure Threshold Alerts dialog box displays, as shown in
If alerts are configured, they will display in table format showing the name of the
Figure
25.
first screen
—
Edge Switch 2/32 Installation Guide
Figure
24.