Quick Start; Map Summary; Event Codes Versus Maintenance Action - McDATA Sphereon 4300 Installation And Service Manual

Maintenence Analysis Procedures

Quick Start

Event Codes versus Maintenance Action

Table 3-3
Event
Code Explanation
011 Login Server database invalid.
021 Name Server database invalid.
031 SNMP request received from unauthorized community.
051 Management Server database invalid.
061 Fabric Controller database invalid.
062 Maximum interswitch hop count exceeded.
063 Remote switch has too many ISLs.
064 ESS response from indicated domain ID not received after maximum
tries.
070 E_Port is segmented.
McDATA Sphereon 4300 Fabric Switch Installation and Service Manual
3-2
Table 3-2 lists and summarizes MAPs. Fault isolation normally begins
at MAP 0000: Start MAP.

MAP Summary

Table 3-2
MAP
MAP 0000: Start MAP
MAP 0100: Power Distribution Analysis
MAP 0200: POST Failure Analysis
MAP 0300: Loss of Browser PC Communication
MAP 0400: FRU Failure Analysis
MAP 0500: Port Failure or Link Incident Analysis
MAP 0600: Fabric or ISL Problem Analysis
Table 3-3 lists event codes, corresponding MAP references, and
provides a quick start guide if an event code is readily available.
Page
3-5
3-9
3-10
3-11
3-14
3-16
3-27
Action
Go to MAP 0600.
Go to MAP 0600.
Add a community name.
Go to MAP 0600.
Go to MAP 0600.
Go to MAP 0600.
Go to MAP 0600.
No action required.
Go to MAP 0600.