Activate Or Deactivate A Card - Chamberlain Elite EL2000 Programming Manual

88
Delete a Card:
Press
1
Enter Card Number to be deleted. Then (#)
2
Delete ALL Cards:
Press
1
Enter
2
Activate or deactivate a card, and activate or deactivate specific date and times.
Activate / Deactivate a Card:
Disabling the Activate Card
then the four If statements could apply:
1. If you disable the Start Activation Date
times, the Card will immediately become active and stay that way until the code is deactivated or deleted.
2. If you enable the Start Activation Date
7
Deactivation Date , the Card will activate on that "Start Date and Time".
3. If you disable the Start Activation Date
7A 7B
Date and Time"
4. If you enable the Start Activation Date
7
Deactivation Date and add an "End Date and Time"
and Time" and deactivate on the "End Date and Time".
To Activate or Deactivate a Card:
Press Then
1
Enter Card Number (1-65534 [26 or 30-bit]). Then (#)
2
Enter Facility Code (0-63 [30-bit], 0-255 [26-bit]).
3
Then (#)
Card Type (26 or 30). Then (#)
4
Activate Card (Enable-1 or Disable-0). Then (#)
5
Use Start Activation Date, (Enable-1 or Disable-0).
6
Then (#)
Example:
1 2
Card "23211" with the existing Facility Code, 30-bit Card Type, activates on February 1st, 2004 at 6PM.
Skipped end date and time.
NOTE: For new cards, if you don't add a Facility Code or Card Type, the system will search for a card
that matches the card number and the default Facility Code and Card Type. For details, see Default
Facility Code or Default Card Type on next page.
Then
203
Then

Activate or Deactivate a Card

5
, the Card will always be deactivated. If you enable the Activate Card
6
and disable the End Deactivation Date
6
and add only a "Start Date and Time"
6
and enable the End Deactivation Date
, the Card will deactivate on that "End Date and Time".
6
and add a "Start Date and Time"
3 4 5 6
Page 42
Enter Facility Code (0-63 [30-bit], 0-255
3
[26-bit]). Then (#)
Card Type (26 or 30). Then (#)
4
Then
87
7
6A 6B
7
6A 6B
enable the End
7A 7B
, the Directory Code will on that "Start Date
6A Start Date (yymmdd). Then (#)
Start Time (hhmm). Then (#)
6B
Use End Deactivation Date, (Enable-1
7
or Disable-0). Then (#)
End Date (yymmdd). Then (#)
7A
End Time (hhmm). Then (#)
7B
NOTE: All time must be entered using a
24-hour format (8AM=0800, 3PM=1500
etc.)
Year Month Day
6A
5
,
and omit all dates and
and disable the End
and add only an "End
24-Hour Time
6B 7 7A 7B