Chamberlain Elite EL2000 Programming Manual page 42

Add or Edit a Full Function Card:
When adding a full function card, it will default as "Active". To deactivate a code, or deactivate
on a specific time and date, see Activate or Deactivate Card on page 42.
Press
1
Enter Card Number (1-65534 [26 or 30-bit]).
2
Then (#)
Enter Facility Code (0-63 [30-bit],
3
0-255 [26-bit]). Then (#)
Enter Card Type (26 or 30). Then (#)
4
Schedule for Door 1 (0-63). Then (#)
5
0=Full Restrictions 1=Full Access
Example:
1
Adds card with number "12287", Facility Code "1", 30-bit Card Type, schedule
NOTE: For new cards, if you don't add a Facility Code or Card Type, the system will add the
defined default values. For details, see Default Facility Code or Default Card Type on page 43.
NOTE: To replace a lost card first delete the lost card (Step 88 on page 42) and then add the
new card to the unit's database (Step 81 on this page).
NOTE: The new card uses the default settings for active and inactive values. To modify these
settings use Step 87 on page 42.
Add a Group of Cards at Once:
This feature allows you to enter a large number of cards into the system at one time. Individual
cards from a group can be edited later. For example, you have 250 cards that you want to enter
into the system so that every time someone needs a card, you won't have to program the
system individually to enter a new card.
Press
1
Enter Card Number (1-65534 [26 or 30-bit]).
2
Then (#)
Enter Ending Card Number (1-65534 [26 or
3
30-bit]). Then (#)
Enter Facility Code (0-63 [30-bit],
3
0-255 [26-bit]). Then (#)
Card Type (26 or 30). Then (#)
3
Activate (1) or Deactivate (0). Then (#)
3
Example:
1 2
Adds a inactive group of Cards that range between "21500" and "21600", default Facility Code,
30-bit Card Type, inactive, and valid at all doors.
NOTES:
• Group cards must be the same Card Type and have the same Facility Code. In addition,
you may also activate the cards, add a schedule to one or more doors. These options must
also be the same.
• If you don't add a Facility Code or Card Type when adding a new card group, the system will
add the defined default values. For details see Default Facility Code or Default Card Type on
page 43.
81
Then
2 3
"2", that opens door 1 ONLY
82
Then
3
Page 41
Schedule for Door 2 (0-63). Then (#)
6
0=Full Restrictions 1=Full Access
Schedule for Door 3 (0-63). Then (#)
7
0=Full Restrictions 1=Full Access
Schedule for Door 4 (0-63). Then (#)
8
0=Full Restrictions 1=Full Access
Factory
All Doors = 1 Full Access
Settings
Door 1 Door 2
4 5 6
Schedule for Door 1 (0 to 63). Then (#)
7
0=Full Restrictions 1=Full Access
Schedule for Door 2 (0 to 63). Then (#)
8
0=Full Restrictions 1=Full Access
Schedule for Door 3 (0 to 63). Then (#)
9
0=Full Restrictions 1=Full Access
Schedule for Door 4 (0 to 63). Then (#)
10
0=Full Restrictions 1=Full Access
Factory Settings: All Doors = 1 Full Access
4 5 6 7
Door 3 Door 4
7 8
8 9 10