Chamberlain Elite EL2000 Programming Manual page 9

Qui ck R ef eren ce
Programming
Page
Number
105 54 Enable or Disable Anti-Passback
Forgiveness at Midnight
109 58 Override Telephone
Company Answering Service
110 59 Set a Phone Number's
Extension Delay Time
111 20 Verify Unit Number
113 58 Dial "0-9" First to Get
an Outside Line Using a
Automated Phone System
115 57 Set Alternative Prefixes
116 60 Change the Visitor
Call Response Keys
120 67 Talk through the
EL Models Speaker
121 68 Cycle Door
122 68 Toggle Door Open/Close Until
123 68 Get Door Status
124 68 Release Door
125 68 Enable/Disable Call Forwarding
For Residence
126 68 Enable/Disable Do Not Disturb
For Residence
141 33 Directory Code Display Option/
Resident Display Option
201 31 Delete ALL Directory Codes
202 38 Delete ALL Entry Codes
203 42 Delete ALL Cards
204 47 Delete ALL Transmitter Codes
205 52 Delete ALL Time Zones
206 71 Delete ALL Access
Codes from Database
To enter programming mode from the keypad
Press *** and the 6-Digit Password (audio feedback will be heard)
Exiting programming mode allows changes to take effect
Important:
• The Pound Key (#) must be used as Data Field Separator and to Save Date at the end
of the sequence.
• Time must be entered using a 24-hour format (8AM=0800; 3PM=1500 etc.).
• Audio Feedback: Programming input is valid. Audio Feedback: Input is not valid.
• If you make an error during an entry, press the asterisk key (*) to begin again.
Description of Task
Page 8
Factory
Programming
Setting
Procedure
Enabled 105 # (0=disable; 1=enable) #
Disabled 109 # (0=no; 1=yes) # Default is "No"
No Delays 110 # (directory code) # (phone extension
delay) # (call forward extension delay) #
111 #
Disabled 113 # (0=disable; 1=enable) #
(0-9, when enabled) #
Normal 115 # (normal-00, mixed-01, asterisk-02,
pound-03, number-1n) # each unit in chain must
have same setting
9,5,3, 116 # (activate door 1) # (activate door 2) #
7,2,1,* (activate door 3) # (activate door 4) # (call wait
toggle) # (extend talk time) # (hang up and deny
access) #
120 #
121 # (door 1-4) #
122 # (door 1-4) # (end time=hhmm) #
123 # (door 1-4) #
124 # (door 1-4) #
125 # (0=disable; 1=enable) #
126 # (0=disable; 1=enable) #
0, 1, 141 # (directory code) # (hidden attribute option) #
2 or 3 (hidden option; 0=show name and code, 1=name
only, 2=code only, 3=hide) #
201 # 101010#
202 # 101010#
203 # 101010#
204 # 101010#
205 # 101010#
206 # 101010#