Access Cards; About Cards - Chamberlain Elite EL2000 Programming Manual

Access cards allow entry or exit through a gate/door. This feature allows
residents to swipe a card into a card reader (other card types and card
readers may apply) to prompt the system to grant access.
Resident uses Card Reader
Before adding or modifying cards, answer the following questions:
• Do you know the card's number? Each card will have a pre-defined number. You must enter the card's
number into the system when assigning a card.
• Do you know each card type you will assign? The system must know the type of card that will be used
(e.g., Standard 26-bit or Sentex 30-bit). You may assign a default card type if all of your cards are the
same type (see also page 43). If you don't know the card type, check with the card manufacturer or
your installing dealer.
• Do the cards have a Facility Code? These codes allow cards to be associated with a facility or
complex. This feature is useful if you manage more than one complex. You may also assign a default
facility code if a group of cards will share the same code (see also page 43).
NOTE: Cards may have the same card code as long as their Facility Codes differ and/or the
cards are a different type.
• What schedules will the card use at each door? You may assign a schedule to each door that a card
may enter through.

Access Cards

About Cards

Page 39
Grants Entry