Enable Or Disable Do Not Disturb Schedule; Enable Or Disable Call Forwarding (Directory Calls) - Chamberlain Elite EL2000 Programming Manual

This will delete ALL Directory Codes from unit.
I mportant: Once you delete the Directory Codes, you cannot retrieve them unless they are
saved in Versa XS.
Press
1
Enter
2

Enable or Disable Do Not Disturb Schedule

Do Not Disturb (DnD) Schedules prevent visitors from calling residents during
specified time frames. To assign a DnD Schedule to a Directory Code, use the
programming step for adding/editing a full function Directory Code (see page 29).
When enabling/disabling DnD Schedule for a Directory Code, the system will
remember the schedule assigned to the code. Factory Setting: Disabled
Press
1
2 Enter the Directory Code to be enabled or disabled. Then (#)
Enable (1) or Disable (0). Then (#)
3
Example:

Enable or Disable Call Forwarding (Directory Calls)

Call Forwarding redirects visitor calls to another telephone number instead of the
regular phone number. During a Call Forwarding call, the visitor will hear normal
telephone line sounds but will not hear the number being dialed.
You can Enable or Disable the Call Forwarding Feature for a specific Directory Code
(Dial-Out). Factory Setting: Disabled
Press Then
1
Enter Directory Code (1-4 digits). Then (#).
2
Enable (1) or Disable (0). Call Forwarding. Then (#).
3
Enter Call Forward Schedule (0-63). Then (#)
3
0=Never Use Call Forward Number
1=Use Call Forward Number
Example:
1 2
Enables Call Forwarding number 555-3662 for Directory Code "14" with a use schedule of "2".
Delete ALL Directory Codes:
Then
Then
1
Disables the Do Not Disturb schedule for Directory Code "34".
3 4
Page 31
201
Then
2 3
Only Enter New Call Forward Phone
5
Number (up to 20 digits). Then (#)
(Skip this step to keep existing Call
Forward Phone Number)
Enter Call Forward Phone Extension (up to
5A
5 digits). Then (#)
(If using an extension the unit MUST have
a phone number).
5
10
46
5A