Card Reader - Chamberlain MyQ Business CAPXL Installation Manual

INTRODUCTION

Card Reader

The CAPXL is designed specifically for the LMMC-MINI reader to be mounted on the faceplate.
1. Disconnect power from the CAPXL.
2. Remove and discard the wing nuts and reader cover from the
CAPXL.
3. Install the reader and secure with the screws.
4. Apply silicon around the cable hole.
5. The reader can be wired to any of the 4 Wiegand Inputs on the
door control boards. Insulate any unused wires from the CAPXL
to prevent a short. (Refer to instructions provided with your
reader for more information.)
6. Reconnect power to the CAPXL.
7. Refer to myQ Business™ for programming.
®
PRE-INSTALL
Mounting Plate
Mounting
Holes
Cable
INSTALL NETWORK
Hole
Mounting Plate
Reader
Cover
Reader
20
ACCESS CONTROL
Wing Nuts
Mounting Plate
Mounting
Holes
Cable
Hole
Mounting Plate