Chamberlain Elite EL2000 Programming Manual page 69

Direct Commands from Your Phone:
Direct command allows you to control the unit from the residence phone.
Press
1
command.
Enter the Unit ID code (if applicable).
2
Select one of the following options:
3
Speaking Through the Unit (Intercom Mode):
ABC
Press
Press
1
command.
Enter the Unit ID code (if applicable).
2
Select one of the following options:
3
Open & Close Door:
ABC
Press
Select the Door (1-4) that you want to control. Press
4
then Door 1 is used.
Press
1
command.
Enter the Unit ID code (if applicable).
2
Select one of the following options:
3
Toggle Door Open/Close Until:
ABC
Press
Select the Door (1-4) that you want to control. Press
4
then Door 1 is used.
ONLY for step #2 sections Toggle Door Open/Close Until and Get Door Status -
5
Enter the Latch Time (hhmm=Hour and Minute). Then
from the residence phone. The unit is now prepared to accept a direct
Used to initiate communications from the
resident phone through the unit at any time.
Then
from the residence phone. The unit is now prepared to accept a direct
Cycles relay. Typically used to momentarily open
a door/gate for a visitor without having the visitor
Then
initiate a call.
from the residence phone. The unit is now prepared to accept a direct
Activate or deactivate the door's relay group until
a specified time of day. If the door is currently
latched open or in the unlock position of an
ABC
Then
automatic time zone then step
door closed and vice versa.
Page 68
120 121 122
. NOTE: If no door is selected
122
. NOTE: If no door is selected
.
will latch the