Chamberlain Elite EL2000 Programming Manual page 11

Multi-Resident Complex (Manager Sharing)
With this type of installation, the manager has the same features as the single family
residence (page 9). The unit can be programmed remotely or locally. Visitors can call
the manager directly using "Call" button or contact residents using preprogrammed
Directory Codes.
Resident
Resident
Resident
Bypass
Manager
Board
Modes of Access
Visitors or residents of a building or complex controlled by a unit can gain
access using one of the following methods:
Resident Phone (Directory Codes):
directory code from the unit to contact him/her. The resident can then
decide to grant or deny the visitor access to the building or complex.
Keypad (Entry Codes):
unit's keypad or an optional external Wiegand-compatible keypad to enter
the building or complex.
Optional Card Readers (Cards):
to an optional Wiegand-compatible card reader to enter the building or
complex. Card readers are typically located near an entry/exit area (e.g.,
door or gate).
Optional Radio Frequency Receivers (Transmitters):
may choose to use an optional Passport radio frequency transmitter or
other optional Wiegand-compatible receiver to enter the building or
complex. For example, these may be used to open a vehicular gate.
separate phone number
separate phone number
separate phone number
Phone Junction Box
U G 1 0 , 2 0 0 5
W E L C O M E
NPB Multi-Resident Complex
A resident may enter a valid entry code on the
A resident may present a valid card
Page 10
Building/Complex
Telco Phone Lines
A visitor may dial a resident's
A resident