Table of Contents
Advertisement
Turn power on and insert Memory Card into Main Mem-
ory Card Slot (Main Memory Card in back slot, Backup
Memory Card in front slot.) (fig a.) Push it all the way in
until card "snaps" into place and the release button pops
up. The screen should display the "Welcome Screen"
(fig b.)
If the screen continues to display the "Insert Memory
Card" screen (fig c.) then eject memory card by press-
ing the corresponding release button down and reinsert
Memory Card into main slot (fig d.). Otherwise contin-
ue with programming.
VIEWING THE SOFTWARE VERSION
To view the memory capacity of the system or to view
the software version currently running on the system in
operation an information screen is accessible on all
Dial Code systems for easy reference. Turn power off
and insert Memory Card in Main Memory Slot. Turn
power on and the information screen should display as
seen in (fig e.)
MEMORY CARD INSTALLATION
Push Button
Card Pops Out
WELCOME
Insert Memory Card
IN MAIN SLOT
DIAL CODE LC-250
REV. 1.00_
Icon Page
21
Main Memory Card Release Button
Memory Capacity
Software Version Number
(fig a.)
(fig b.)
(fig c.)
(fig d.)
(fig e.)
Advertisement
Table of Contents
