Large Screen Correction; Screen Setting (Pt-Dz8700/Pt-Ds8500 Only) - Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual

3 ) Press <ENTER> button.
z
The [ 709MODE] or [MEASURED MODE]
screen will be displayed.
Press ▲▼ to select [MEASURED
4 )
DATA].
5 ) Press <ENTER> button.
z
The [MEASURED DATA] screen will be
displayed.
6 ) Use the colorimeter to measure
the luminance (Y) and chromaticity
coordinates (x, y)
Press ▲▼ to select the colors, and
7 )
press ◄► to select their values.
z
If [AUTO TEST PATTERN] is turned [ON],
the test pattern of the selected color is
displayed.
8 ) After all the data has been input,
press <MENU> button.
z
The [ 709MODE] or [MEASURED MODE]
screen will be displayed.
Inputting the coordinates of a desired
Q
color (only [MEASURED])
Press ▲▼ to select [TARGET
9 )
DATA].
10) Press <ENTER> button.
z
The [TARGET DATA] screen will be
displayed.
Press ▲▼ to select the desired
11)
colors, and press ◄► to input
their coordinates.
z
If [AUTO TEST PATTERN] is turned [ON],
the test pattern of the selected color is
displayed.
12 ) After all the data has been input,
press <MENU> button.
Note
z
If [709MODE] has been selected as the [COLOR
MATCHING] setting, the 3 primary colors defined by the
ITU-R BT.709 standard will be set as the target data.
z
If the target data is outside the color range of the
projector, the colors will not be projected correctly.
DISPLAY OPTION menu
LARGE SCREEN
CORRECTION
When viewing images close up on a large screen,
you can correct the colors that appear lighter on the
screen so that they appear the same as the colors
that would appear on a normal-sized screen.
Press ▲▼ to select [LARGE SCREEN
1 )
CORRECTION].
Press ◄► to switch [LARGE SCREEN
2 )
CORRECTION].
z
The setting will change as follows each time
◄► is pressed.
OFF (No
1 (Low)
correction)
SCREEN SETTING
(PT-DZ8700/PT-DS8500 only)
Set this in accordance with the screen you are using.
When the projection image aspect ratio is changed,
the projector makes corrections to ensure the optimal
images for the set screen size.
Press ▲▼ to select [SCREEN
1 )
SETTING].
2 ) Press <ENTER> button.
z
The [SCREEN SETTING] screen will be
displayed.
Press ◄► to switch [SCREEN
3 )
FORMAT].
J
PT-DZ8700U
16 : 10 4 : 3
J
PT-DS8500U
4 : 3
2 (High)
16 : 9
16 : 9
69
ENGLISH -