Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual page 113

Problem
z
z
Picture from a
computer does not
appear.
z
Picture from a
z
computer DVI-D
graphic board does
z
not appear.
z
Projection suddenly
became darker.
The cable may be longer than the optional cable.
The external video output from a laptop computer may not be correct.
(You may be able to change the external output settings by pressing the
[Fn] + [F3] or [Fn] + [F10] keys simultaneously. The actual method varies
depending on the type of computer; refer to the documentation provided
with your computer for further details.)
[DVI-D IN] setting in [DISPLAY OPTION] menu may be incorrect setting.
The graphic board driver of the computer needs to be updated to the
latest version.
The computer may need to be restarted after switching [DVI-D IN]
setting in [DISPLAY OPTION] menu of the projector correctly.
Has the filter been used up? (When the filter has been used up, the
projector is not shut down but is automatically switched to a [LOW] lamp
output mode using one lamp.)
Cause
Troubleshooting
Reference
page
—
—
72
—
72
108
ENGLISH -
113