Network Menu; Network Setup; Network Control; Network Status - Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual

NETWORK menu

z
See "Navigating through the menu"
Æ
( page 49).
z
See "MAIN MENU" and "SUB MENU"
Æ
( page 50).

NETWORK SETUP

Make the initial network settings before using the
network connection.
Press ▲▼ to select [NETWORK
1 )
SETUP].
2 ) Press <ENTER> button.
z
The [NETWORK SETUP] screen will be
displayed.
Press ▲▼ to select an item, and
3 )
change the setting according to the
instructions.
PROJECTOR
NAME
(Display of host
name and setting)
DHCP
(DHCP client
function)
IP ADDRESS
(Display of IP
address and
setting)
SUBNET MASK
(Displaying
and setting the
subnet mask)
DEFAULT
GATEWAY
(Display of gateway
address and
setting)
STORE
Press ▲▼ to select [STORE], and
4 )
press <ENTER> button.
94
- ENGLISH
Change as needed when using
a DHCP server.
Set [DHCP] item to [ON] when
to acquire an IP address
automatically using the DHCP
server.
Set to [OFF] if [DHCP] server is
not used. Enter the IP address if
DHCP server is not used.
Enter the IP address if DHCP
server is not used.
If not using a DHCP server, enter
the subnet mask.
Enter the gateway address if
DHCP server is not used.
Save the current network
settings.
Note
z
Before using the DHCP server, make sure the DHCP
server is already functioning.
z
For details of IP address, subnet mask, and gateway, ask
the network administrator.

NETWORK CONTROL

This sets the network control method.
Press ▲▼ to select [NETWORK
1 )
CONTROL].
2 ) Press <ENTER> button.
z
The [NETWORK CONTROL] screen will be
displayed.
Press ▲▼ to select items, and press
3 )
◄► to change the setting.
Set this to [ON] when you want
WEB
to perform control with the Web
CONTROL
browser.
Set this to [ON] when you want
PJLink
to perform control with the PJLink
CONTROL
protocol.
Set to [ON] to control using the
COMMAND
control command via the serial
Û
CONTROL
terminal. (
COMMAND Set the port number used for the
PORT command control.
Save the current network control
STORE
settings.
Û
: If settings have been made without an
administrator password of the Web browser
control, add 2-byte "00" instead of STX, and a line-
feed code (0Dh) instead of ETX. If settings have
been made with an administrator password of the
Web browser control, add a 32-byte hash value
and "00" instead of STX and a line-feed code (0Dh)
instead of ETX. The hash value is created by MD5
combining "admin1:", password, ":" and random
numbers. The random numbers are 8-byte values
sent from the projector when connecting.

NETWORK STATUS

This displays the network status of the main unit.
Press ▲▼ to select [NETWORK
1 )
STATUS].
2 ) Press <ENTER> button.
z
The [NETWORK STATUS] screen will be
displayed.
Æ
page 119)