Basic operations using the remote control
Changing the picture aspect
ratio
You can toggle through an appropriate set of aspect
ratios for a given input signal.
button
Press <ASPECT> button on the remote
control.
z
The setting will change as follows each time
<ASPECT> button is pressed.
*1
VID AUTO
DEFAULT
*2
AUTO
HV FIT
V FIT
*1 :
VIDEO/S-VIDEO (NTSC) only
*2 :
RGB1/RGB2 (480i, 480p) only
*3 :
S-VIDEO (NTSC) only
Note
z
Some aspect ratios may not be available for selection
depending on the input signal.
Refer to "ASPECT" of "POSITION menu" (
details.
48
- ENGLISH
VID AUTO
*3
S1 AUTO
(PRI.)
THROUGH
16 : 9
H FIT
4 : 3
Æ
page 58) for
*3