Control Panel - Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual

J

CONTROL PANEL

<STANDBY> button
Returns to the standby mode.
<POWER ON> button
Starts the projection while in the
standby mode.
VIDEO
Switches to VIDEO input.
S-VIDEO
Switches to S-VIDEO input.
RGB1
Switches to RGB1 input.
RGB2
Switches to RGB2 input.
DVI-D/HDMI
Switches to DVI-D or HDMI input.
SDI
Switches to SDI input.
(PT-DZ8700U/PT-DS8500U only)
J
Terminals on side
REMOTE 2 IN
Connect a cable from an
external control circuit.
REMOTE 1 IN/OUT
When two or more main
units are used in the system,
they can be connected and
controlled with wired remote
control cable.
SDI IN
Connect an SDI signals.
(PT-DZ8700U/PT-DS8500U
only)
HDMI IN
Connect a HDMI signals.
VIDEO IN
Connect a VIDEO signals.
S-VIDEO IN
Connect an S-VIDEO signals.
Attention
z
Do not touch the LAN terminal with your bare hands or body, as body parts may have charged static electricity. Failure to
do so may cause malfunctions.
Do not touch the metallic parts of LAN terminal and cable.
z
Please connect the LAN to indoor devices only.
About Your Projector
<MENU> button
Displays and clears the main menu, and returns to the previous
menu when the menu is displayed.
If you hold it down for at least 3 seconds while the on-screen
indication is [OFF], the [OFF] state is canceled. (
<LENS> button
This button is used together with ▲▼◄► to
adjust focus, zoom and shift by the projection
lens.
<ENTER> button
Press to activate a menu selection or to initiate a
function.
<SHUTTER> button
Pressing this button toggles the projector's
internal mechanical shutter to black out the
Æ
projector. ( page 46)
▲▼◄► button
Use these buttons to select menu items,
change settings, adjust levels, and to enter the
[SECURITY] password.
<AUTO SETUP> button
Pressing this button while projecting an image
automatically corrects the picture positioning on
the screen. While the auto setup feature is active,
a message "PROGRESS" appears on the screen.
Æ
( page 47)
SERIAL IN/OUT
Connect an RS-232C cable from/to a computer.
DVI-D IN
LAN
RGB2 IN
Connect an RGB or YP
RGB (YP P )1 IN
B R
Connect an RGB or YP
Æ
page 49)
Connect a single link DVI-D
signals.
Connect a LAN cable for network
connection.
P signals.
B R
P signals.
B R
ENGLISH -
19