Position Menu; Shift; Aspect - Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual

POSITION menu

z
See "Navigating through the menu"
Æ
( page 49).
z
See "MAIN MENU" and "SUB MENU"
Æ
( page 50).

SHIFT

This function allows the user to adjust the raster
position vertically or horizontally if the position of the
image projected on the screen is displaced even
when the projector is properly aligned with the screen,
and the internal test patterns are correctly framed.
Press ▲▼ to select [SHIFT].
1 )
2 ) Press <ENTER> button.
z
The [SHIFT] screen will be displayed.
Press ▲▼◄► to adjust the position.
3 )
J
For vertical (up and down)
adjustment
Operation
The picture
Press ▲.
position
moves up.
The picture
Press ▼.
position
moves down.
J
For horizontal (right and left)
adjustment
Operation
The picture
position
Press ►.
moves to the
right.
The picture
position
Press ◄.
moves to the
left.
58
- ENGLISH
Adjustment
Adjustment

ASPECT

This changes the aspect ratio of the projected image.
This changes the aspect ratio for the screen range
selected with [SCREEN SETTING]. Set [SCREEN
SETTING] first. ( Æ
page 69)
Press ▲▼ to select [ASPECT].
1 )
Press ◄► or <ENTER> button.
2 )
z
The [ASPECT] individual adjustment screen will
be displayed.
Press ◄► to switch [ASPECT].
3 )
z
The setting will change as follows each time
◄► is pressed.
*1
VID AUTO
DEFAULT S1 AUTO
*2
AUTO
HV FIT
V FIT H FIT
*1 : VIDEO/S-VIDEO (NTSC) only
*2 : RGB1/RGB2 (480i, 480p) only
*3 : S-VIDEO (NTSC) only
J
DEFAULT
Pictures are displayed without changing the aspect
ratio of the input signals.
J
VID AUTO
The projector identifies the video ID (VID)
embedded in the picture signals and displays the
picture by automatically switching the screen sizes
between 4 : 3 and 16 : 9. This function is effective
for the NTSC signal input.
J
AUTO
The projector identifies the video ID (VID)
embedded in the picture signals and displays the
picture by automatically switching the screen sizes
between 4 : 3 and 16 : 9. This function is effective
for the 480i/480p signal input.
J
S1 AUTO
The projector identifies the S1 signal and displays
the picture by automatically switching the screen
sizes between 4 : 3 and 16 : 9. This function is
effective for S-VIDEO NTSC signals.
*3 *3
VID AUTO (PRI.)
THROUGH
16 : 9
4 : 3