Table of Contents
Advertisement
[LARGE SCREEN CORRECTION]
Corrects the phenomenon in which colors that appear lighter when viewed on a large screen viewed from a close
distance compared to when viewed on an average screen size so that colors appear the same.
1)
Press as to select [LARGE SCREEN CORRECTION].
2)
Press qw to switch the item.
[OFF]
[1]
[2]
[SCREEN SETTING]
Set the screen size.
Correct to the optimum image position for the set screen when the aspect ratio of a projected image is changed.
Set as necessary for the screen in use.
1)
Press as to select [SCREEN SETTING].
2)
Press the <ENTER> button.
f The [SCREEN SETTING] screen is displayed.
3)
Press qw to switch the [SCREEN FORMAT] item.
f The items will switch each time you press the button.
[SCREEN FORMAT]
[16:10]
[4:3]
[16:9]
4)
Press as to select [SCREEN POSITION].
f [SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to [16:10].
5)
Press qw to adjust [SCREEN POSITION].
[AUTO SIGNAL]
Set whether to execute automatic setup of signals automatically.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP>
button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
1)
Press as to select [AUTO SIGNAL].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
[AUTO SETUP]
Set this when adjusting a special signal or horizontally long (such as 16:9) signal.
Setting with [MODE]
1)
Press as to select [AUTO SETUP].
2)
Press the <ENTER> button.
f The [AUTO SETUP] screen is displayed.
3)
Press as to select [MODE].
124 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Performs no correction.
Performs weak correction.
Performs strong correction.
Range when [SCREEN POSITION] is selected
Cannot be adjusted.
Adjusts the horizontal position between -320 and 320.
Adjusts the vertical position between -120 and 120.
Sets the auto signal function to off.
Executes automatic setup automatically when images are changed to unregistered signals during
projection.
Advertisement
Table of Contents
