Signal List Menu; Registering A Signal To The List; Renaming A Registered Data; Deleting A Registered Data - Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual

SIGNAL LIST menu

z
See "Navigating through the menu"
Æ
( page 49).
z
See "MAIN MENU" and "SUB MENU"
Æ
( page 50).
J
REGISTERED SIGNAL STATUS
z
The name can be set for each sub memory.
z
MEMORY NO. : A1 (1-2)
Sub memory number
When the address number (A1, A2, ...H7,
H8) signal is registered

Registering a signal to the list

When a new format input signal is applied to the
projector, press <MENU> button to register to the
SIGNAL LIST.
Note
z
You can register data up to 96 in total number of the
signal data and any corresponding sub memory data.
z
The memories are numbered over 12 pages (A to L: 8
data items can be registered on each page), and the
data is registered in the unused memory with the lowest
number. If all the memories are used, the data of the old
signals is overwritten in sequence.
z
The names of the registered data are automatically
determined by the input signals and memory numbers.
z
If a menu is being displayed, the new signals will be
registered at the instant they are input.

Renaming a registered data

Press ▲▼◄► to select the required
1 )
signal data.
2 ) Press <ENTER> button.
z
The [REGISTERED SIGNAL STATUS] screen
will be displayed.
z
Displays the character list.
z
Press <MENU> button to return to the
[REGISTERED SIGNAL LIST] screen.
3 ) Press <ENTER> button.
z
The [RENAME] screen will be displayed.
Press ▲▼◄► to select characters
4 )
and press <ENTER> button to input
them.
Press ▲▼◄► to select [OK], and
5 )
press <ENTER> button.
z
The [REGISTERED SIGNAL LIST] screen will
be displayed.
Press ▲▼◄► to select [CANCEL] and press
z
<ENTER> button to return to the [REGISTERED
SIGNAL LIST] without any change.

Deleting a registered data

Press ▲▼◄► to select the required
1 )
signal data.
2 ) Press <DEFAULT> button.
z
The [ENTRY SIGNAL CLEAR] screen will be
displayed.
z
Press <MENU> button to cancel and return to
the [REGISTERED SIGNAL LIST] without any
change.
3 ) Press <ENTER> button.
z
Displays [REGISTERED SIGNAL LIST] and
confirm the data is deleted.
89
ENGLISH -