Picture Menu; Picture Mode - Panasonic PTDZ8700U - DLP PROJECTOR Operating Instructions Manual

PICTURE menu

z
See "Navigating through the menu"
Æ
( page 49).
z
See "MAIN MENU" and "SUB MENU"
Æ
( page 50).

PICTURE MODE

The user can switch to the desired picture mode
suitable for the image source and the environment in
which this projector is used.
Press ▲▼ to select [PICTURE MODE].
1 )
Press ◄► to switch [PICTURE MODE].
2 )
z
The setting will change as follows each time
◄► is pressed.
STANDARD
USER
GRAPHIC
The picture becomes suitable for
STANDARD
moving images in general.
The picture becomes suitable for
CINEMA
movie sources.
NATURAL The picture complies with sRGB.
The picture becomes similar to
DICOM SIM.
DICOM Part14 gray scale.
The light output is maximized for use
DYNAMIC
in bright areas.
The picture becomes suitable for
GRAPHIC
input from to the personal computer.
You can set your favorite picture
USER
mode.
52
- ENGLISH
CINEMA NATURAL
DICOM SIM.
DYNAMIC
Note
z
Factory defaults are [GRAPHIC] for RGB system and
[STANDARD] for moving images.
z
DICOM is an abbreviation for "Digital Imaging and
Communication in Medicine", which is a standard for
medical imaging devices. Although the name "DICOM" is
used, this projector is not a medical device. Accordingly,
do not use the projected images for medical diagnosis or
similar usage.
z
When <ENTER> button is pressed while a [PICTURE
MODE] other than [USER] is selected, the setting is
saved and will be used as the preset value next time
a signal is inputted. At this time, all the data except
[SYSTEM SELECTOR] in the [PICTURE] menu are
saved.
z
The factory default of [USER] is the image conformed to
ITU-R BT.709 Standard.
J
Changing the name of [USER]
1. Select [USER] in step 2).
2. Press <ENTER> button.
z
A screen showing details of the [PICTURE
MODE] will be displayed.
Press ▲▼ to select [PICTURE MODE
3.
NAME CHANGE].
4. Press <ENTER> button.
z
The [ PICTURE MODE NAME CHANGE]
screen will be displayed.
PICTURE MODE NAME CHANGE
Press ▲▼◄► to select characters
5 )
and press <ENTER> button to input
them.
Press ▲▼◄► to select [OK], and
6.
press <ENTER> button.
z
The picture mode name is changed.