Network Connection Problems; Network Setup - Oki CX2731MFP Advance User Manual

For Windows
Cause
The MFP is not set as the
default printer.
The output port for the
printer driver is incorrect.
A print job from another
interface is in progress.
[Received invalid data] is
displayed on the display
screen and printing cannot
be done.
A print job is automatically
canceled.

Network Connection Problems

Common to Windows and Macintosh
Cause
Using a crossover cable.
The MFP is turned on
before a cable was
connected.
The hub and the MFP are
incompatible or have some
problem.
MC361/MC561/CX2731 MFP Advanced User's Guide
Set the MFP as the default printer.
Select the output port to which the
Ethernet or USB cable is connected.
Wait until the print job is done.
Press the <SETTING> key and select
[Admin Setup] > [Print Setup] > [Print
menu] > [Printer Adjust] > [Wait
Timeout], and then select a longer time.
The default setting is 40 seconds.
If using Print Job Control, the print job is
not authorized to print, or the Job
Accounting log buffer may be full.
Use a straight cable.
Connect cables before turning on the MFP.
Press the <SETTING> key and select
[Admin Setup] > [Network Menu] >
[Network Setup] > [HUB Link Setting], and
then select [10BASE-T HALF].
269
– Issues: Unable to Print
Remedy
Remedy