Network Connection Problems; Cannot Print With The Equipment (Network Connection Problems); Cannot Print With Smb Print; Cannot Print Properly With Appletalk Print - Oki CX4545 MFP Troubleshooting Manual

Multifunctional digital color systems
Hide thumbs Also See for CX4545 MFP:
Table of Contents

Advertisement

3 TROUBLESHOOTING FOR PRINTING

Network Connection Problems

This section describes the troubleshooting for printing in the network connection environment.
See also the checklists by types of printing and operating systems on  P.90 "Printing Problems (Network Related)"
 Cannot print with the equipment (network connection problems)
Problem Description
I cannot perform printing with the equipment.
Corrective Action
See the checklist below to determine if the cause of the problem is related to a network.
If it is, see  P.90 "Printing Problems (Network Related)". In that section, several OS- and printing method-based check
lists are provided to help you find the appropriate action to take.
No. Check...
1
Have you set the protocol settings so they are
compatible with your network and client protocol
settings?
2
Have you set up the appropriate type(s) of print
services that should be supported?
3
If you are using Novell print services, did you set
up the Novell side of network printing, such as
creating print servers and attaching the print
queue?
4
If you set up Novell print services, can you see the
print job using PCONSOLE or NWAdmin?
5
Have you checked the gateway and subnet
settings to make sure that the equipment is part of
the same network gateway as the client from
which you are trying to print?
6
Are other services and communications
performed over the network behaving in the
normal and expected manner?
 Cannot print with SMB print
Problem Description
When an attempt is made to print a document using an SMB connection, the job cannot be printed and such messages
continuously appear as "No more connections can be made to this remote computer" or "Your file could not be printed due
to an error".
Corrective Action
SMB print is supposed to be utilized in a small network. If you can use Windows XP, Windows Vista, Windows 7, Windows
Server 2003, or Windows Server 2008 as a print server, printing via the Windows Print Server is recommended.
If you cannot use the Windows Print Server in your network, use LPR print instead.
 Cannot print properly with AppleTalk print
Problem Description
 Text will be printed as striped lines for an email message.
 Some text is not printed in a document.
 When a web browser is used, the web page is not printed in spite of the print job being sent to the equipment.
Corrective Action
If the errors above occur with AppleTalk print, use LPR print instead.
76

Network Connection Problems

Yes
No
Corrective Action
Set up the proper protocol.
Next Step
Check the settings required for your printing
Next Step
environment.
Set up the NetWare server.
Refer to the Software Installation Guide.
Next Step
Refer to your Novell PCONSOLE or NWAdmin
Next Step
user documentation for help with using these
utilities.
Set up the TCP/IP correctly.
Next Step
Refer to your network documentation or use a
End
network diagnostic utility to identify the network
problem.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es9460 mfpEs9470 mfpCx3535 mfp

Table of Contents