Transmission Functions; Redialing - Oki CX2731MFP Advance User Manual

Transmission Functions ________

Redialing

Automatic Redialing
The MFP automatically redials if the first fax transmission fails
• when the recipient MFP is busy or does not answer, or
• when a communication error happens.
Note
When the transmission continues to fail after the set number of
redial attempts, the document stored in memory is erased and
an error message prints out.
To set the number of redial attempts and their interval:
1 Press the <SETTING> key.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select [Fax Setup], then press
<OK>.
6 Press the down arrow key to select [Other Settings], then press
<OK>.
7 Make sure that [Redial Tries] is selected, then press <OK>.
8 Press the down arrow key to specify the desired number of redial
attempts, then press <OK>.
9 Press the down arrow key to select [Redial Interval], then press
<OK>.
10 Press the down arrow key to specify the desired redial interval,
then press <OK>.
11 Use the left arrow key to go back to the main screen.
MC361/MC561/CX2731 MFP Advanced User's Guide
35
– Faxing: Transmission Functions